Initial import.

[BearSSL] / src / ssl / ssl_hs_server.t0

\ Copyright (c) 2016 Thomas Pornin <pornin@bolet.org>
\
\ Permission is hereby granted, free of charge, to any person obtaining 
\ a copy of this software and associated documentation files (the
\ "Software"), to deal in the Software without restriction, including
\ without limitation the rights to use, copy, modify, merge, publish,
\ distribute, sublicense, and/or sell copies of the Software, and to
\ permit persons to whom the Software is furnished to do so, subject to
\ the following conditions:
\
\ The above copyright notice and this permission notice shall be 
\ included in all copies or substantial portions of the Software.
\
\ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 
\ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
\ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
\ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
\ BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
\ ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
\ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
\ SOFTWARE.

\ ----------------------------------------------------------------------
\ Handshake processing code, for the server.
\ The common T0 code (ssl_hs_common.t0) shall be read first.

preamble {

/*
 * This macro evaluates to a pointer to the server context, under that
 * specific name. It must be noted that since the engine context is the
 * first field of the br_ssl_server_context structure ('eng'), then
 * pointers values of both types are interchangeable, modulo an
 * appropriate cast. This also means that "adresses" computed as offsets
 * within the structure work for both kinds of context.
 */
#define CTX  ((br_ssl_server_context *)ENG)

/*
 * Decrypt the pre-master secret (RSA key exchange).
 */
static void
do_rsa_decrypt(br_ssl_server_context *ctx, int prf_id,
        unsigned char *epms, size_t len)
{
        uint32_t x;
        unsigned char rpms[48];

        /*
         * Decrypt the PMS.
         */
        x = (*ctx->policy_vtable)->do_keyx(ctx->policy_vtable, epms, len);

        /*
         * Set the first two bytes to the maximum supported client
         * protocol version. These bytes are used for version rollback
         * detection; forceing the two bytes will make the master secret
         * wrong if the bytes are not correct. This process is
         * recommended by RFC 5246 (section 7.4.7.1).
         */
        br_enc16be(epms, ctx->client_max_version);

        /*
         * Make a random PMS and copy it above the decrypted value if the
         * decryption failed. Note that we use a constant-time conditional
         * copy.
         */
        br_hmac_drbg_generate(&ctx->eng.rng, rpms, sizeof rpms);
        br_ccopy(x ^ 1, epms, rpms, sizeof rpms);

        /*
         * Compute master secret.
         */
        br_ssl_engine_compute_master(&ctx->eng, prf_id, epms, 48);

        /*
         * Clear the pre-master secret from RAM: it is normally a buffer
         * in the context, hence potentially long-lived.
         */
        memset(epms, 0, len);
}

/*
 * Common part for ECDH and ECDHE.
 */
static void
ecdh_common(br_ssl_server_context *ctx, int prf_id,
        unsigned char *cpoint, size_t cpoint_len, uint32_t ctl)
{
        unsigned char rpms[80];
        size_t pms_len;

        /*
         * The point length is supposed to be 1+2*Xlen, where Xlen is
         * the length (in bytes) of the X coordinate, i.e. the pre-master
         * secret. If the provided point is too large, then it is
         * obviously incorrect (i.e. everybody can see that it is
         * incorrect), so leaking that fact is not a problem.
         */
        pms_len = cpoint_len >> 1;
        if (pms_len > sizeof rpms) {
                pms_len = sizeof rpms;
                ctl = 0;
        }

        /*
         * Make a random PMS and copy it above the decrypted value if the
         * decryption failed. Note that we use a constant-time conditional
         * copy.
         */
        br_hmac_drbg_generate(&ctx->eng.rng, rpms, pms_len);
        br_ccopy(ctl ^ 1, cpoint + 1, rpms, pms_len);

        /*
         * Compute master secret.
         */
        br_ssl_engine_compute_master(&ctx->eng, prf_id, cpoint + 1, pms_len);

        /*
         * Clear the pre-master secret from RAM: it is normally a buffer
         * in the context, hence potentially long-lived.
         */
        memset(cpoint, 0, cpoint_len);
}

/*
 * Do the ECDH key exchange (not ECDHE).
 */
static void
do_ecdh(br_ssl_server_context *ctx, int prf_id,
        unsigned char *cpoint, size_t cpoint_len)
{
        uint32_t x;

        /*
         * Finalise the key exchange.
         */
        x = (*ctx->policy_vtable)->do_keyx(ctx->policy_vtable,
                cpoint, cpoint_len);
        ecdh_common(ctx, prf_id, cpoint, cpoint_len, x);
}

/*
 * Do the ECDHE key exchange (part 1: generation of transient key, and
 * computing of the point to send to the client). Returned value is the
 * signature length (in bytes), or -x on error (with x being an error
 * code). The encoded point is written in the ecdhe_point[] context buffer
 * (length in ecdhe_point_len).
 */
static int
do_ecdhe_part1(br_ssl_server_context *ctx, int curve)
{
        int hash;
        unsigned mask;
        const unsigned char *order, *generator;
        size_t olen, glen;
        br_multihash_context mhc;
        unsigned char head[4];
        size_t hv_len, sig_len;

        if (!((ctx->eng.iec->supported_curves >> curve) & 1)) {
                return -BR_ERR_INVALID_ALGORITHM;
        }
        ctx->eng.ecdhe_curve = curve;

        /*
         * Generate our private key. We need a non-zero random value
         * which is lower than the curve order, in a "large enough"
         * range. We force the top bit to 0 and bottom bit to 1, which
         * does the trick. Note that contrary to what happens in ECDSA,
         * this is not a problem if we do not cover the full range of
         * possible values.
         */
        order = ctx->eng.iec->order(curve, &olen);
        mask = 0xFF;
        while (mask >= order[0]) {
                mask >>= 1;
        }
        br_hmac_drbg_generate(&ctx->eng.rng, ctx->ecdhe_key, olen);
        ctx->ecdhe_key[0] &= mask;
        ctx->ecdhe_key[olen - 1] |= 0x01;
        ctx->ecdhe_key_len = olen;

        /*
         * Compute our ECDH point.
         */
        generator = ctx->eng.iec->generator(curve, &glen);
        memcpy(ctx->eng.ecdhe_point, generator, glen);
        ctx->eng.ecdhe_point_len = glen;
        if (!ctx->eng.iec->mul(ctx->eng.ecdhe_point, glen,
                ctx->ecdhe_key, olen, curve))
        {
                return -BR_ERR_INVALID_ALGORITHM;
        }

        /*
         * Compute the signature.
         */
        br_multihash_zero(&mhc);
        br_multihash_copyimpl(&mhc, &ctx->eng.mhash);
        br_multihash_init(&mhc);
        br_multihash_update(&mhc,
                ctx->eng.client_random, sizeof ctx->eng.client_random);
        br_multihash_update(&mhc,
                ctx->eng.server_random, sizeof ctx->eng.server_random);
        head[0] = 3;
        head[1] = 0;
        head[2] = curve;
        head[3] = ctx->eng.ecdhe_point_len;
        br_multihash_update(&mhc, head, sizeof head);
        br_multihash_update(&mhc,
                ctx->eng.ecdhe_point, ctx->eng.ecdhe_point_len);
        hash = ctx->sign_hash_id;
        if (hash) {
                hv_len = br_multihash_out(&mhc, hash, ctx->eng.pad);
                if (hv_len == 0) {
                        return -BR_ERR_INVALID_ALGORITHM;
                }
        } else {
                if (!br_multihash_out(&mhc, br_md5_ID, ctx->eng.pad)
                        || !br_multihash_out(&mhc,
                        br_sha1_ID, ctx->eng.pad + 16))
                {
                        return -BR_ERR_INVALID_ALGORITHM;
                }
                hv_len = 36;
        }
        sig_len = (*ctx->policy_vtable)->do_sign(ctx->policy_vtable,
                hash, hv_len, ctx->eng.pad, sizeof ctx->eng.pad);
        return sig_len ? (int)sig_len : -BR_ERR_INVALID_ALGORITHM;
}

/*
 * Do the ECDHE key exchange (part 2: computation of the shared secret
 * from the point sent by the client).
 */
static void
do_ecdhe_part2(br_ssl_server_context *ctx, int prf_id,
        unsigned char *cpoint, size_t cpoint_len)
{
        int curve;
        uint32_t x;

        curve = ctx->eng.ecdhe_curve;

        /*
         * Finalise the key exchange.
         */
        x = ctx->eng.iec->mul(cpoint, cpoint_len,
                ctx->ecdhe_key, ctx->ecdhe_key_len, curve);
        ecdh_common(ctx, prf_id, cpoint, cpoint_len, x);

        /*
         * Clear the ECDHE private key. Forward Secrecy is achieved insofar
         * as that key does not get stolen, so we'd better destroy it
         * as soon as it ceases to be useful.
         */
        memset(ctx->ecdhe_key, 0, ctx->ecdhe_key_len);
}

}

\ =======================================================================

: addr-ctx:
        next-word { field }
        "addr-" field + 0 1 define-word
        0 8191 "offsetof(br_ssl_server_context, " field + ")" + make-CX
        postpone literal postpone ; ;

addr-ctx: flags
addr-ctx: client_max_version
addr-ctx: client_suites
addr-ctx: client_suites_num
addr-ctx: hashes
addr-ctx: curves
addr-ctx: sign_hash_id

\ Get address and length of the client_suites[] buffer. Length is expressed
\ in bytes.
: addr-len-client_suites ( -- addr len )
        addr-client_suites
        CX 0 1023 { BR_MAX_CIPHER_SUITES * sizeof(br_suite_translated) } ;

\ Check a server flag by index.
: flag? ( index -- bool )
        addr-flags get32 swap >> 1 and neg ;

\ Read the client SNI extension.
: read-client-sni ( lim -- lim )
        \ Open extension value.
        read16 open-elt

        \ Open ServerNameList.
        read16 open-elt

        \ Find if there is a name of type 0 (host_name) with a length
        \ that fits in our dedicated buffer.
        begin dup while
                read8 if
                        read-ignore-16
                else
                        read16
                        dup 255 <= if
                                dup addr-server_name + 0 swap set8
                                addr-server_name swap read-blob
                        else
                                skip-blob
                        then
                then
        repeat

        \ Close ServerNameList.
        close-elt

        \ Close extension value.
        close-elt ;

\ Set the new maximum fragment length. BEWARE: this shall be called only
\ after reading the ClientHello and before writing the ServerHello.
cc: set-max-frag-len ( len -- ) {
        size_t max_frag_len = T0_POP();

        br_ssl_engine_new_max_frag_len(ENG, max_frag_len);

        /*
         * We must adjust our own output limit. Since we call this only
         * after receiving a ClientHello and before beginning to send
         * the ServerHello, the next output record should be empty at
         * that point, so we can use max_frag_len as a limit.
         */
        if (ENG->hlen_out > max_frag_len) {
                ENG->hlen_out = max_frag_len;
        }
}

\ Read the client Max Frag Length extension.
: read-client-frag ( lim -- lim )
        \ Extension value must have length exactly 1 byte.
        read16 1 <> if ERR_BAD_FRAGLEN fail then
        read8

        \ The byte value must be 1, 2, 3 or 4.
        dup dup 0= swap 5 >= or if ERR_BAD_FRAGLEN fail then

        \ If our own maximum fragment length is greater, then we reduce
        \ our length.
        8 + dup addr-log_max_frag_len get8 < if
                dup 1 swap << set-max-frag-len
                dup addr-log_max_frag_len set8
                addr-peer_log_max_frag_len set8
        else
                drop
        then ;

\ Read the Secure Renegotiation extension from the client.
: read-client-reneg ( lim -- lim )
        \ Get value length.
        read16

        \ The "reneg" value is one of:
        \   0   on first handshake, client support is unknown
        \   1   client does not support secure renegotiation
        \   2   client supports secure renegotiation
        addr-reneg get8 case
                0 of
                        \ First handshake, value length shall be 1.
                        1 = ifnot ERR_BAD_SECRENEG fail then
                        read8 if ERR_BAD_SECRENEG fail then
                        2 addr-reneg set8
                endof
                2 of
                        \ Renegotiation, value shall consist of 13 bytes
                        \ (header + copy of the saved client "Finished").
                        13 = ifnot ERR_BAD_SECRENEG fail then
                        read8 12 = ifnot ERR_BAD_SECRENEG fail then
                        addr-pad 12 read-blob
                        addr-saved_finished addr-pad 12 memcmp ifnot
                                ERR_BAD_SECRENEG fail
                        then
                endof

                \ If "reneg" is 1 then the client is not supposed to support
                \ the extension, and it sends it nonetheless, which means
                \ foul play.
                ERR_BAD_SECRENEG fail
        endcase ;

\ Read the Signature Algorithms extension.
: read-signatures ( lim -- lim )
        \ Open extension value.
        read16 open-elt

        \ Clear list of supported signature algorithms.
        0 addr-hashes set16

        \ Get list of algorithms length.
        read16 open-elt
        begin dup while
                read8 { hash } read8 { sign }
                \ We keep the value if the signature is either 1 (RSA) or
                \ 3 (ECDSA), and the hash is one of the SHA-* functions
                \ (2 to 6, from SHA-1 to SHA-512). Note that we reject
                \ any use of MD5. Also, we do not keep track of the client
                \ preferences.
                hash 2 >= hash 6 <= and
                sign 1 = sign 3 = or
                and if
                        addr-hashes get16
                        1 sign 1- 2 << hash + << or addr-hashes set16
                then
        repeat
        close-elt

        \ Close extension value.
        close-elt ;

\ Read the Supported Curves extension.
: read-supported-curves ( lim -- lim )
        \ Open extension value.
        read16 open-elt

        \ Open list of curve identifiers.
        read16 open-elt

        \ Get all supported curves.
        0 addr-curves set32
        begin dup while
                read16 dup 32 < if
                        1 swap << addr-curves get32 or addr-curves set32
                else
                        drop
                then
        repeat
        close-elt
        close-elt ;

\ Call policy handler to get cipher suite, hash function identifier and
\ certificate chain. Returned value is 0 (false) on failure.
cc: call-policy-handler ( -- bool ) {
        int x;
        br_ssl_server_choices choices;

        x = (*CTX->policy_vtable)->choose(
                CTX->policy_vtable, CTX, &choices);
        ENG->session.cipher_suite = choices.cipher_suite;
        CTX->sign_hash_id = choices.hash_id;
        CTX->chain = choices.chain;
        CTX->chain_len = choices.chain_len;
        T0_PUSHi(-(x != 0));
}

\ Check for a remembered session.
cc: check-resume ( -- bool ) {
        if (ENG->session.session_id_len == 32
                && CTX->cache_vtable != NULL && (*CTX->cache_vtable)->load(
                        CTX->cache_vtable, CTX, &ENG->session))
        {
                T0_PUSHi(-1);
        } else {
                T0_PUSH(0);
        }
}

\ Save the current session.
cc: save-session ( -- ) {
        if (CTX->cache_vtable != NULL) {
                (*CTX->cache_vtable)->save(
                        CTX->cache_vtable, CTX, &ENG->session);
        }
}

\ Read ClientHello. If the session is resumed, then -1 is returned.
: read-ClientHello ( -- resume )
        \ Get header, and check message type.
        read-handshake-header 1 = ifnot ERR_UNEXPECTED fail then

        \ Get maximum protocol version from client.
        read16 dup { client-version-max } addr-client_max_version set16

        \ Client random.
        addr-client_random 32 read-blob

        \ Client session ID.
        read8 dup 32 > if ERR_OVERSIZED_ID fail then
        dup addr-session_id_len set8
        addr-session_id swap read-blob

        \ Lookup session for resumption. We should do that here because
        \ we need to verify that the remembered cipher suite is still
        \ matched by this ClientHello.
        check-resume { resume }

        \ Cipher suites. We read all cipher suites from client, each time
        \ matching against our own list. We accumulare suites in the
        \ client_suites[] context buffer: we keep suites that are
        \ supported by both the client and the server (so the list size
        \ cannot exceed that of the server list), and we keep them in
        \ either client or server preference order (depending on the
        \ relevant flag).
        \
        \ We also need to identify the pseudo cipher suite for secure
        \ renegotiation here.
        read16 open-elt
        0 { reneg-scsv }
        0 { resume-suite }
        addr-len-client_suites dup2 bzero
        over + { css-off css-max }
        begin
                dup while
                read16 dup { suite }

                \ Check that when resuming a session, the requested
                \ suite is still valid.
                resume if
                        dup addr-cipher_suite get16 = if
                                -1 >resume-suite
                        then
                then

                \ Special handling for TLS_EMPTY_RENEGOTIATION_INFO_SCSV.
                \ This fake cipher suite may occur only in the first
                \ handshake.
                dup 0x00FF = if
                        addr-reneg get8 if ERR_BAD_SECRENEG fail then
                        -1 >reneg-scsv
                then

                \ Test whether the suite is supported by the server.
                scan-suite dup 0< if
                        \ We do not support this cipher suite. Note
                        \ that this also covers the case of pseudo
                        \ cipher suites.
                        drop
                else
                        \ If we use server order, then we place the
                        \ suite at the computed offset; otherwise, we
                        \ append it to the list at the current place.
                        0 flag? if
                                2 << addr-client_suites + suite swap set16
                        else
                                drop
                                \ We need to test for list length because
                                \ the client list may have duplicates,
                                \ that we do not filter. Duplicates are
                                \ invalid so this is not a problem if we
                                \ reject such clients.
                                css-off css-max >= if
                                        ERR_BAD_HANDSHAKE fail
                                then
                                suite css-off set16
                                css-off 4 + >css-off
                        then
                then
        repeat
        drop

        \ Compression methods. We need method 0 (no compression).
        0 { ok-compression }
        read8 open-elt
        begin dup while
                read8 ifnot -1 >ok-compression then
        repeat
        close-elt

        \ Set default values for parameters that may be affected by
        \ extensions:
        \ -- server name is empty
        \ -- client is reputed to know RSA and ECDSA, both with SHA-1
        \ -- the default elliptic curve is P-256 (secp256r1, id = 23)
        0 addr-server_name set8
        0x404 addr-hashes set16
        0x800000 addr-curves set32

        \ Process extensions, if any.
        dup if
                read16 open-elt
                begin dup while
                        read16 case
                                \ Server Name Indication.
                                0x0000 of
                                        read-client-sni
                                endof
                                \ Max Frag Length.
                                0x0001 of
                                        read-client-frag
                                endof
                                \ Secure Renegotiation.
                                0xFF01 of
                                        read-client-reneg
                                endof
                                \ Signature Algorithms.
                                0x000D of
                                        read-signatures
                                endof
                                \ Supported Curves.
                                0x000A of
                                        read-supported-curves
                                endof
                                \ Supported Point Formats.
                                0x000B of
                                        \ We only support "uncompressed", and
                                        \ all implementations are supposed to
                                        \ support it anyway.
                                        read-ignore-16
                                endof

                                \ Other extensions are ignored.
                                drop read-ignore-16 0
                        endcase
                repeat
                close-elt
        then

        \ Close message.
        close-elt

        \ Cancel session resumption if the cipher suite was not found.
        resume resume-suite and >resume

        \ Now check the received data. Since the client is expecting an
        \ answer, we can send an appropriate fatal alert on any error.

        \ Compute protocol version as the minimum of our maximum version,
        \ and the maximum version sent by the client. If that is less than
        \ 0x0300 (SSL-3.0), then fail. Otherwise, we may at least send an
        \ alert with that version. We still reject versions lower than our
        \ configured minimum.
        addr-version_max get16
        dup client-version-max > if drop client-version-max then
        dup 0x0300 < if ERR_BAD_VERSION fail then
        client-version-max addr-version_min get16 < if
                70 fail-alert
        then
        \ If resuming the session, then enforce the previously negotiated
        \ version (if still possible).
        resume if
                addr-version get16 client-version-max <= if
                        drop addr-version get16
                else
                        0 >resume
                then
        then
        dup addr-version set16
        dup addr-version_in set16
        dup addr-version_out set16
        0x0303 >= { can-tls12 }

        \ If the client sent TLS_EMPTY_RENEGOTIATION_INFO_SCSV, then
        \ we should mark the client as "supporting secure renegotiation".
        reneg-scsv if 2 addr-reneg set8 then

        \ Check compression.
        ok-compression ifnot 40 fail-alert then

        \ Filter hash function support by what the server also supports.
        \ If no common hash function remains, then ECDHE suites are not
        \ possible.
        supported-hash-functions drop 257 *
        addr-hashes get16 and dup addr-hashes set16
        0<> { can-ecdhe }

        \ Filter supported curves. If there is no common curve between
        \ client and us, then ECDHE suites cannot be used. Note that we
        \ may still allow ECDH, depending on the EC key handler.
        addr-curves get32 supported-curves and dup addr-curves set32
        ifnot 0 >can-ecdhe then

        \ If resuming a session, then the next steps are not necessary;
        \ we won't invoke the policy handler.
        resume if -1 ret then

        \ We are not resuming, so a new session ID should be generated.
        addr-session_id 32 mkrand

        \ Translate common cipher suites, then squeeze out holes: there
        \ may be holes because of the way we fill the list when the
        \ server preference order is enforced, and also in case some
        \ suites are filtered out. In particular:
        \ -- ECDHE suites are removed if there is no common hash function
        \    (for signatures) or no common curve.
        \ -- TLS-1.2-only suites are removed if the negociated version is
        \    TLS-1.1 or lower.
        addr-client_suites dup >css-off
        begin dup css-max < while
                dup get16 dup cipher-suite-to-elements
                can-ecdhe ifnot
                        dup 12 >> dup 1 = swap 2 = or if
                                2drop 0 dup
                        then
                then
                can-tls12 ifnot
                        \ Suites compatible with TLS-1.0 and TLS-1.1 are
                        \ exactly the ones that use HMAC/SHA-1.
                        dup 0xF0 and 0x20 <> if
                                2drop 0 dup
                        then
                then
                dup if
                        css-off 2+ set16 css-off set16
                        css-off 4 + >css-off
                else
                        2drop
                then
                4 +
        repeat
        drop
        css-off addr-client_suites - 2 >>
        dup ifnot
                \ No common cipher suite: handshake failure.
                40 fail-alert
        then
        addr-client_suites_num set8

        \ Call policy handler to obtain the cipher suite and other
        \ parameters.
        call-policy-handler ifnot 40 fail-alert then

        \ We are not resuming a session.
        0 ;

\ Write ServerHello.
: write-ServerHello ( initial -- )
        { initial }
        \ Compute ServerHello length. Right now we only send the
        \ "secure renegotiation" extension.
        2 write8 70

        addr-reneg get8 2 = if
                initial if 5 else 29 then
        else
                0
        then
        { ext-reneg-len }
        addr-peer_log_max_frag_len get8 if 5 else 0 then
        { ext-max-frag-len }

        ext-reneg-len ext-max-frag-len + dup if 2 + then +
        write24

        \ Protocol version
        addr-version get16 write16

        \ Server random
        addr-server_random 4 bzero
        addr-server_random 4 + 28 mkrand
        addr-server_random 32 write-blob

        \ Session ID
        \ TODO: if we have no session cache at all, we might send here
        \ an empty session ID. This would save a bit of network
        \ bandwidth.
        32 write8
        addr-session_id 32 write-blob

        \ Cipher suite
        addr-cipher_suite get16 write16

        \ Compression method
        0 write8

        \ Extensions
        ext-reneg-len ext-max-frag-len + dup if
                write16
                ext-reneg-len dup if
                        0xFF01 write16
                        4 - dup write16
                        1- addr-saved_finished swap write-blob-head8
                else
                        drop
                then
                ext-max-frag-len if
                        0x0001 write16
                        1 write16 addr-peer_log_max_frag_len get8 8 - write8
                then
        else
                drop
        then ;

\ Compute total chain length. This includes the individual certificate
\ headers, but not the total chain header. This also sets the cert_cur,
\ cert_len and chain_len context fields.
cc: total-chain-length ( -- len ) {
        size_t u;
        uint32_t total;

        total = 0;
        for (u = 0; u < CTX->chain_len; u ++) {
                total += 3 + (uint32_t)CTX->chain[u].data_len;
        }
        T0_PUSH(total);
}

\ Get length for current certificate in the chain; if the chain end was
\ reached, then this returns -1.
cc: begin-cert ( -- len ) {
        if (CTX->chain_len == 0) {
                T0_PUSHi(-1);
        } else {
                CTX->cert_cur = CTX->chain->data;
                CTX->cert_len = CTX->chain->data_len;
                CTX->chain ++;
                CTX->chain_len --;
                T0_PUSH(CTX->cert_len);
        }
}

\ Copy a chunk of certificate data into the pad. Returned value is the
\ chunk length, or 0 if the certificate end is reached.
cc: copy-cert-chunk ( -- len ) {
        size_t clen;

        clen = CTX->cert_len;
        if (clen > sizeof ENG->pad) {
                clen = sizeof ENG->pad;
        }
        memcpy(ENG->pad, CTX->cert_cur, clen);
        CTX->cert_cur += clen;
        CTX->cert_len -= clen;
        T0_PUSH(clen);
}

\ Write the server Certificate.
: write-Certificate ( -- )
        11 write8
        total-chain-length
        dup 3 + write24 write24
        begin
                begin-cert
                dup 0< if drop ret then write24
                begin copy-cert-chunk dup while
                        addr-pad swap write-blob
                repeat
                drop
        again ;

\ Do the first part of ECDHE. Returned value is the computed signature
\ length, or a negative error code on error.
cc: do-ecdhe-part1 ( curve -- len ) {
        int curve = T0_POPi();
        T0_PUSHi(do_ecdhe_part1(CTX, curve));
}

\ Write the Server Key Exchange message (if applicable).
: write-ServerKeyExchange ( -- )
        addr-cipher_suite get16 use-ecdhe? ifnot ret then

        \ We must select an appropriate curve among the curves that
        \ are supported both by us and the peer. Right now we use
        \ the one with the smallest ID, which in practice means P-256.
        \ (TODO: add some option to make that behaviour configurable.)
        \
        \ This loop always terminates because previous processing made
        \ sure that ECDHE suites are not selectable if there is no common
        \ curve.
        addr-curves get32 0
        begin dup2 >> 1 and 0= while 1+ repeat
        { curve-id } drop

        \ Compute the signed curve point to send.
        curve-id do-ecdhe-part1 dup 0< if neg fail then { sig-len }

        \ If using TLS-1.2+, then the hash function and signature
        \ algorithm are explicitly encoded in the message.
        addr-version get16 0x0303 >= { tls1.2+ }

        12 write8
        sig-len addr-ecdhe_point_len get8 + tls1.2+ 2 and + 6 + write24

        \ Curve parameters: named curve with 16-bit ID.
        3 write8 curve-id write16

        \ Public point.
        addr-ecdhe_point addr-ecdhe_point_len get8 write-blob-head8

        \ If TLS-1.2+, write hash and signature identifiers.
        tls1.2+ if
                \ Hash identifier is in the sign_hash_id field.
                addr-sign_hash_id get8 write8
                \ 'use-rsa-ecdhe?' returns -1 for RSA, 0 for ECDSA.
                \ The byte on the wire shall be 1 for RSA, 3 for ECDSA.
                addr-cipher_suite get16 use-rsa-ecdhe? 1 << 3 + write8
        then

        \ Signature.
        sig-len write16
        addr-pad sig-len write-blob ;

\ Write the Server Hello Done message.
: write-ServerHelloDone ( -- )
        14 write8 0 write24 ;

\ Perform RSA decryption of the client-sent pre-master secret. The value
\ is in the pad, and its length is provided as parameter.
cc: do-rsa-decrypt ( len prf_id -- ) {
        int prf_id = T0_POPi();
        size_t len = T0_POP();
        do_rsa_decrypt(CTX, prf_id, ENG->pad, len);
}

\ Perform ECDH (not ECDHE). The point from the client is in the pad, and
\ its length is provided as parameter.
cc: do-ecdh ( len prf_id -- ) {
        int prf_id = T0_POPi();
        size_t len = T0_POP();
        do_ecdh(CTX, prf_id, ENG->pad, len);
}

\ Do the second part of ECDHE.
cc: do-ecdhe-part2 ( len prf_id -- ) {
        int prf_id = T0_POPi();
        size_t len = T0_POP();
        do_ecdhe_part2(CTX, prf_id, ENG->pad, len);
}

\ Read the Client Key Exchange.
: read-ClientKeyExchange ( -- )
        \ Get header, and check message type.
        read-handshake-header 16 = ifnot ERR_UNEXPECTED fail then

        \ What we should get depends on the cipher suite.
        addr-cipher_suite get16 use-rsa-keyx? if
                \ RSA key exchange: we expect a RSA-encrypted value.
                read16
                dup 512 > if ERR_LIMIT_EXCEEDED fail then
                dup { enc-rsa-len }
                addr-pad swap read-blob
                enc-rsa-len addr-cipher_suite get16 prf-id do-rsa-decrypt
        then
        addr-cipher_suite get16 dup use-ecdhe? swap use-ecdh? { ecdhe ecdh }
        ecdh ecdhe or if
                \ ECDH or ECDHE key exchange: we expect an EC point.
                read8 dup { ec-point-len }
                addr-pad swap read-blob
                ec-point-len addr-cipher_suite get16 prf-id
                ecdhe if do-ecdhe-part2 else do-ecdh then
        then
        close-elt ;

\ Send a HelloRequest.
: send-HelloRequest ( -- )
        flush-record
        begin can-output? not while wait-co drop repeat
        22 addr-record_type_out set8
        0 write8 0 write24 flush-record
        23 addr-record_type_out set8 ;

\ Make a handshake.
: do-handshake ( initial -- )
        0 addr-application_data set8
        22 addr-record_type_out set8
        multihash-init
        read-ClientHello
        more-incoming-bytes? if ERR_UNEXPECTED fail then
        if
                \ Session resumption
                write-ServerHello
                0 write-CCS-Finished
                0 read-CCS-Finished
        else
                \ Not a session resumption
                write-ServerHello
                write-Certificate
                write-ServerKeyExchange
                write-ServerHelloDone
                flush-record
                read-ClientKeyExchange
                0 read-CCS-Finished
                0 write-CCS-Finished
                save-session
        then
        1 addr-application_data set8
        23 addr-record_type_out set8 ;

\ Entry point.
: main ( -- ! )
        \ Perform initial handshake.
        -1 do-handshake

        begin
                \ Wait for further invocation. At that point, we should
                \ get either an explicit call for renegotiation, or
                \ an incoming ClientHello handshake message.
                wait-co
                dup 0x07 and case
                        0x00 of
                                0x10 and if
                                        \ The best we can do is ask for a
                                        \ renegotiation, then wait for it
                                        \ to happen.
                                        send-HelloRequest
                                then
                        endof
                        0x01 of
                                \ Reject renegotiations if the peer does not
                                \ support secure renegotiation. As allowed
                                \ by RFC 5246, we do not send a
                                \ no_renegotiation alert and just ignore the
                                \ HelloRequest.
                                drop
                                addr-reneg get8 1 <> if
                                        0 do-handshake
                                else
                                        flush-record
                                        begin can-output? not while
                                                wait-co drop
                                        repeat
                                then
                        endof
                        ERR_UNEXPECTED fail
                endcase
        again
        ;